This in no way is meant to replace the more detailed user manual.  It is just a short cut/checklist/reminder of what needs to be done to use the target.  I do recommended you become familiar with the manual first and refer to this only as needed.

If you do not follow these steps the target will not function properly….

1    Drop the base from on the ground, short feet,  or the wheels on the newer version, towards the shooter.

2    Insert the drop pillar, it can only fit one way in the base…  Fork goes to the back.

3    Ensure center foot is touching the ground and adjust the base so there is a slight back lean to the pillar.

4    Insert the upper torso, once it hits the stop, pull the safety lock pin, flip the hoop loop down and ease the target back a little so the crossbar will get past the up stop.

5   Insert stakes, attach cardboard, slip shirt over cardboard.

6    Fire some test rounds.

7    Adjust the round count to your liking.
Be safe!